Peer Capability-Advertise Conventional; Peer Capability-Advertise Route-Refresh - H3C S9500 Series Command Manual

Command Manual – BGP
H3C S9500 Series Routing Switches
[Sysname-bgp-vpn1] peer test as-path-acl 1 export

1.1.45 peer capability-advertise conventional

Syntax
peer { group-name | ip-address } capability-advertise conventional
undo peer { group-name | ip-address } capability-advertise conventional
View
BGP view
Default Level
2: System level
Parameters
group-name: Name of a peer group.
ip-address: IP address of a peer.
Description
Use the peer capability-advertise conventional command to disable BGP
multi-protocol extension and route refresh for a peer/peer group.
Use the undo peer capability-advertise command to enable BGP multi-protocol
extension and route refresh for a peer/peer group.
By default, BGP multi-protocol extension and route refresh are enabled.
Examples
# In BGP view, disable multi-protocol extension and route refresh for peer 160.89.2.33.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 160.89.2.33 as-number 100
[Sysname-bgp] peer 160.89.2.33 capability-advertise conventional

1.1.46 peer capability-advertise route-refresh

Syntax
peer { group-name | ip-address } capability-advertise route-refresh
undo peer { group-name | ip-address } capability-advertise route-refresh
View
BGP view, BGP-VPN instance view
Chapter 1 BGP Configuration Commands
1-47