Dsp Configurator Configuration; Axp 64 C At Operation; Connecting To Dsp Configurator - Extron electronics AXP 64 C AT User Manual

DSP Configurator
Configuration
This section contains information on configuring and operating the AXP 64 C AT using the
DXP Configurator software.
•
•
•
AXP 64 C AT Operation
You can create a complete configuration for the AXP 64 C AT using the DSP Configurator
software. When first launched, the DSP Configurator opens a blank configuration with no
processing defined. All gain stages are muted and set to Unity (0 dB) gain. Input and output
gain stages provide metering in dBFS to assist configuration of the device for optimal
operation.
NOTE:
Because the AXP 64 C AT is a digital device, optimal operating levels are close to 0 dBFS
(0 dB "full scale" on the input or output meters) without going over it. Levels above 0 dBFS
cause clipping, which causes audible signal distortion on a digital device.
The AXP 64 C AT provides a comprehensive set of DSP processing tools and acoustic
echo cancellation (AEC). Use the filter tools to shape the tonal quality of your source
material. Use the dynamics processors for level control or system protection. AEC features
advanced algorithms that deliver fast echo cancellation convergence for optimal intelligibility
in situations that challenge performance, including double-talk, and the use of wireless
microphones at the near end.

Connecting to DSP Configurator

1.
2.
AXP 64 C AT Operation
Connecting to DSP Configurator
Accessing the DSP Configurator Help File
To upload the configuration, Dante Controller must also be loaded on your computer
Downloading and Installing Dante Controller
(see
Open the DSP Configurator Software
program from the desktop shortcut.
Alternatively, to run DSP Configurator
from the default install location, click
Start> Programs> Extron> DSP
Configurator.exe
The Extron DSP Configurator splash
screen opens (see figure 14).
From the DSP Configurator splash
screen drop-down list ( ), select the
1
AXP 64 C AT connected to the host
PC and click OK ( ).
2
• DSP Configurator Main Workspace
• Menu Bar
on page 23).
Figure 14. DSP Configurator
AXP 64 C AT • DSP Configurator Configuration 16