7.1.1.3.3 "Connection" Tab; Figure 18: Start > Main Menu > Channel Selection List; Figure 19: Connection Tab For Disconnected I/O Module; Figure 20: Connection Tab For Connected I/O Module - WAGO 750-496 Manual

WAGO-I/O-SYSTEM 750
750-496 8AI 0/4-20mA S.E.
Figure 18: Start > Main Menu > Channel Selection List
The exact meaning of the individual selection options is described in the "Main
Menu" section.

7.1.1.3.3 "Connection" Tab

Click the Connection tab in the horizontal tab menu to display the following
selection options in the main menu.
If the is no connection to the I/O module, the following button appears:

Figure 19: Connection Tab for Disconnected I/O Module

Click the [Connect] button to establish a connection to the I/O module.
If there is a connection to the I/O module, the following button appears:

Figure 20: Connection Tab for Connected I/O Module

Click the [Disconnect] button to interrupt the connection to the I/O module.
The exact meaning of the individual selection options is described in the "Main
Menu" section.
Manual
Version 1.2.0
Commissioning 51