2ai 4-20ma hart ex i 2-channel analog input; hart; intrinsically safe, 2ai 4-20ma hart ne43 ex i 2-channel analog input; hart; namur ne43; intrinsically safe (100 pages)
WAGO Kontakttechnik GmbH & Co. KG declines all liability resulting from improper action and damage to WAGO products and third party products due to non-observance of the information contained in this manual.
Routines or advice for efficient use of the device and software optimization. More information References on additional literature, manuals, data sheets and INTERNET pages 1.3 Number Notation Number Code Example Note Decimal normal notation Hexadecimal 0x64 C notation Binary '100' Within ', '0110.0100' Nibble separated with dots WAGO-I/O-SYSTEM 750 I/O Modules...
1.5 Scope This manual describes the Digital Input Module 750-415 4 DI AC/DC 24 V 20 ms of the modular WAGO-I/O-SYSTEM 750. Handling, assembly and start-up are described in the manual of the Fieldbus Coupler. Therefore this documentation is valid only in the connection with the appropriate manual.
DI1 and D1 or DI2 and D2, D3 and D3 or D4 and D4. Each input module has an RC noise rejection filter with a time constant of 20 ms. All inputs are isolated. The status of the four input channels is indicated via status LEDs. WAGO-I/O-SYSTEM 750 I/O Modules...
Attention This module has no power contacts. For field supply to downstream I/O modules, a supply module will be needed. The digital input module 750-415 can be used with all couplers/controllers of the WAGO-I/O-SYSTEM 750. 2.1.1.3 Display Elements Channel Designation...
10 • 750-415 [4 DI AC/DC 24 V 20 ms] Process Image More Information Detailed references to the approvals are listed in the document "Overview Approvals WAGO-I/O-SYSTEM 750", which you can find on the CD ROM ELECTRONICC Tools and Docs (Item-No.: 0888-0412) or in the internet under: www.wago.com...
Page 11
750-415 [4 DI AC/DC 24 V 20 ms]• 11 Process Image WAGO-I/O-SYSTEM 750 I/O Modules...