Installation Instructions; General Information; Requirements For The Installation Site; Lighting - Wexiodisk WD-6 Installation And User Manual

Installation instructions

3. Installation instructions
Read the chapters GENERAL INSTRUCTIONS and SAFETY INSTRUCTIONS
carefully before starting work.

3.1 General information

Read these instructions carefully, as they contain important information regarding
the correct installation method.
•
•
•
•

3.2 Requirements for the installation site

3.2.1 Lighting

In order to ensure the best possible working conditions during installation,
operation, servicing and maintenance, make sure that the machine is installed in
a well-lit room.

3.2.2 Ventilation and ambient temperature

The machine is intended to be used in an indoor environment at normal room
temperature. The machine produces heat and steam when in operation. In order
to ensure the best possible working conditions, a certain air renewal rate is
required in the dishwashing room. The ventilation requirements for the
dishwashing room are to be dimensioned on the basis of the applicable
standards.
Glasstilt
The instructions should be used together with the machine's wiring
diagram. These can be found in the machine's electrical cabinet.
The machine can be equipped with a number of different options. Certain
options may be standard in a number of countries. Check what your
machine is equipped with.
If holes need to be drilled in the machine, the holes must be fitted with an
edge strip or similar protection.
If a WD-PRM 6/7 is being connected to a WD-6/7, it should have software
version 4.7 or newer, and if it is being connected to a WD-6/7 DUPLUS, the
software version should be 2.5 or newer. If you are using an earlier
software version this should be updated. The level pipe in the dishwasher
has been replaced with a bottom filter.
8
Rev. 2.0 (202202)