Profile Management; Figure 5-2 Profile Management Tab - Honeywell Performance HED1PR3 Software Configuration Manual

Parameter
Flip
3D Noise
Reduction
3D NR Level
Full-screen
Test
Default
Cancel
Save

Profile Management

Profile management has three modes: Normal, Full Time, and Schedule.
•
•
•
Table 5-1 Camera Configurations (cont'd)
Function
No Flip: This is the default setting.
Flip 180°: Flips the video 180°.
Flip 90°: Rotates the video by 90°.
Flip 360°: Rotates the video by 360°.
3D noise reduction is enabled by default.
This value ranges from 0 to 100. The default is 50 when 3D NR is on.
Click the
full-screen test. Double-click to return to the normal screen.
Click to return the camera to the default setup.
Click to cancel the current operation and restore the previously saved
operation.
Click to save the currently configured customized settings.
Figure 5-2 Profile Management Tab
Select Normal to configure the video as normal.
Select Full Time, and you must select either Day or Night for the video.
Select Schedule, and you can configure a detained time interval.
Note When you make changes to the video configuration, you will immediately see the
effects of those changes in the video. However, you must click Save to save and
apply these settings.
button on the bottom left of the video window to begin a
Configuring Camera Settings | 51
800-21358 - A - 10/2015