Pvas Stay Bolts - Danfoss PVG 16 Technical Information

Technical Information
PVG 16 Proportional Valve Group

PVAS Stay Bolts

92 | © Danfoss | December 2018
PVAS Stay Bolts kit for various PVG combinations consist of three tie rods, six washers, six nuts and O-ring.
Use the guide and reference tables how to choose PVAS kit.
The tie rods are inserted through the entire length of the PVG valve stack. The nuts are tightened at the
pump side and at the end plate.
To find the PVAS kit that fits your PVG 16 valve stack, you need to go to the table
length and weight on page 93 and find the length. Then go to the table
and find the matching part number.
For stay bolts for a PVG 32/16 combination, see this
Stay bolts for PVG 256/128/32/16 combinations consist of two different kits. See
Combinations on page 95 to find the right kits for your combination.
Combinations with PVG 100 and PVG 120 requires special PVAS kits. These are not included in the PVAS
table.
PVAS Part Numbers
PVG 32/16 Combinations on page 94.
PVG 16 modules total
on page 93
PVG 256/128/32/16
BC00000211en-000901