Open Center Pvp With Hpco And Pve Pprv - Danfoss PVG 16 Technical Information

Technical Information
PVG 16 Proportional Valve Group
PVP Inlet Modules

Open center PVP with HPCO and PVE PPRV

© Danfoss | December 2018
The Open Center PVP inlet with integrated High Pressure Carry Over (HPCO) functionality is intended for
use with fixed displacement pumps in applications where one pump supply for multiple hydraulic
subsystems is desired.
The integrated HPCO functionality guides the excess flow of the PVG 16 valve group to the external
hydraulic subsystem(s), giving priority to the PVG 16 work functions.
The Open Center PVP with HPCO and PVE PPRV features:
•
Integrated LS pressure relief valve
•
Threaded ports for P/T/LS/HPCO and M measuring gauge
•
Integrated pilot pressure reducing valve (PPRV) for PVE
•
Optional T0 facility and external T0 port
•
Optional external pilot pressure port (Pp)
•
Optional LS unloading valve, PVPX
Only applicable with PVST end plates with separate T-port due to blocked T-lines for HPCO functionality.
Open Center PVP with HPCO, PVE PPRV schematic
LS
HPCO
P
Technical specification for PVP
Max. P-port continuous Max. P-port intermittent
350 [5076 psi] 400 bar [5800 psi]
Technical specification
Parameter
Fluid temperature
Fluid viscosity
Fluid cleanliness
Operating temperature
M T0
Max. T-port static/
dynamic
25/40 bar [365/580 psi]
Minimum Recommended range
-30°C [-22°F] 30 to 60°C [86 to 140°F]
2
4 mm /s [39 SUS] 12 to 75 mm
23/19/16 (according to ISO 4406)
Ambient: -30 to 60°C [-22 to 140°F]
Max. rated flow
140 l/min [37 US gal/min]
Maximum
90° [194°F]
2 2
/s [65 to 347 SUS] 460 mm /s [2128 SUS]
BC00000211en-000901 | 17