Pvs End Plates - Danfoss PVG 16 Technical Information

Technical Information
PVG 16 Proportional Valve Group

PVS End Plates

86 | © Danfoss | December 2018
The PVG 16 PVS end plates close off the valve stack section placed between them by placing them at the
end. Furthermore, the end plate is ensuring Load Sense (LS) is relieved to tank pressure when the valve is
not operated.
The PVS end plate variants are based on a generic platform with a wide selection of additional features,
enabling you to tailor the PVS to suit the demands of any hydraulic system.
The generic PVS end plates platform includes the following main variants:
•
PVS/PVSI – Either aluminum or cast iron
•
PVS/PVSI with LX-connection – Either aluminum or cast iron
•
PVSI with P-, T-, LX- and M-connection – Cast iron
•
PVST with T-connection – Steel
PVS/PVSI
PVSI with P-, T-, LX- and M-connection
For more information about PVS End Plates, see:
PVS/PVSI on page 87
PVS/PVSI with LX-connection
PVSI with P-, T-, LX- and M-connection
PVST with T-connection on page 91
PVS/PVSI with LX-connection
PVST with T-connection
on page 88
on page 90
BC00000211en-000901