Table of Contents
Advertisement
Technical Information
PVG-EX 32 Proportional Valve Group
PVAS Stay Bolts
©
Danfoss | June 2019
PVAS Stay Bolts kit for various PVG combinations consist of three tie rods, six washers, six nuts and O-ring.
Use the guide and reference tables how to choose PVAS kit.
The tie rods are inserted through the entire length of the PVG valve stack. The nuts are tightened at the
pump side and at the end plate.
To find the PVAS kit that fits your PVG-EX 32 valve stack, you need to go to the table
total length
on page 132 and find the length. Then go to the table
find the matching part number.
PVG-EX 32 modules
PVAS Part Numbers
on page 132 and
BC290860493426en-000103 | 131
Advertisement
Table of Contents
