Pvea Series 6 Proportional Control Actuator - Danfoss PVG 16 Technical Information

Technical Information
PVG 16 Proportional Valve Group
PVG 16 Actuation

PVEA Series 6 Proportional Control Actuator

80 | © Danfoss | December 2018
The PVEA actuator is a proportional control actuator with a closed-loop spool control primarily used to
control work functions with above medium performance requirements
PVEA Series 6
The PVEA functionality includes an electric circuit with a closed-loop logic. An integrated feedback
transducer measures spool movement in relation to the input signal. The PVEA features passive fault
monitoring, LED indicating fault state, error output pin and Power Save mode.
PVEA functionality
Power Save mode is entered when the command signal to the PVEA is below 15% of the supply voltage.
Entering Power Save mode will torn off the power to the solenoid valves. Power Save mode can be
identified by the LED blinking green at 1 Hz.
All variants available with following features:
•
Neutral position or max. spool stroke according to control signal
•
11–32 V multi-voltage power supply
DC
•
DEUTSCH connectors
•
Standard PVE pilot oil pressure of 13.5 bar [196 psi]
•
LED indicating error state and passive fault monitoring
•
Float (-F) and CAN-interface (-CI)
BC00000211en-000901