Pvg 16 Actuation; Pvm Manual Actuation - Danfoss PVG 16 Technical Information

Technical Information
PVG 16 Proportional Valve Group

PVG 16 Actuation

PVM Manual Actuation

© Danfoss | December 2018
PVG 16 actuation can be done manually, hydraulically, electro-hydraulically and electrically.
PVG 16 actuation overview:
•
PVM Manual Actuation on page 69
PVMD Cover on page 70
‒
•
PVH Hydraulic Actuation on page 71
•
PVHC Electro-Hydraulic Actuation
•
PVE Electro-hydraulic Actuation
PVEO on page 77
‒
PVEA Series 6 Proportional Control Actuator
‒
The PVM manual actuation cover is intended for use on any work section where the operator has to have
the ability to interact with the spool manually.
The PVM variants are based on a generic platform with a selection of additional features, enabling you to
tailor the PVM to suit the demands of any hydraulic system, which includes the following main variants:
•
PVM manual actuation or override of a function
•
Spring centering cover without manual override (PVML)
‒
Optional with lever base
‒
Optional with lever base and lever
‒
Optional flow adjustment screws
The adjustment screws are intended for limiting the spool travel and thereby the maximum achievable
flow.
PVM cover
Control lever data
Standard control range
± 13.9°
on page 73
on page 75
on page 80
PVM dimensions
60 [2.36]
Control lever range + float position
22.3°
51.7 [2.04]
45.6 [1.80]
13 [0.51]
BC00000211en-000901 | 69