Optional Fieldbus Connection; Profibus Dp - Siemens SINAMICS G180 Installation And Operating Instructions Manual

Description
3.3 Accessories
3.3.14

Optional fieldbus connection

3.3.14.1

PROFIBUS DP

You can purchase a PROFIBUS board as accessory. The PROFIBUS board is installed
under the grey plastic cover. The board can be retrofitted. You recognize from the
description "...
integrated.
More details about the board and the PROFIBUS parameters can be found in the separate
PROFIBUS description.
①
②
③
④
⑤
⑥
⑦
Figure 3-5
Table 3- 4 PROFIBUS board - external elements
component
LED "Status" (only just
visible under the grey
cover)
LED "Online"
LED "Offline"
PROFIBUS connection Sub-D socket for PROFIBUS
56
Type code
_ _ _ _ P _" on the rating plate that a PROFIBUS board has been
PROFIBUS connection
Switch for terminating resistor
PROFIBUS address, settable
LED "bus diagnostics"
LED "Offline"
Unused LED
LED "Online"
PROFIBUS board
Function
Flashing red at different frequencies
Flashing green at 1 Hz,
0.5 s on, 0.5 s off
Flashing green at 2 Hz,
0.25 s on, 0.25 s off
This green LED lights if the bus connection is OK.
This red LED lights if the bus connection is interrupted. Check the external bus configuration.
Hardware fault on the PROFIBUS board: con-
tact Customer Service.
PROFIBUS board initialization OK
Error when initializing the PROFIBUS board:
contact Customer Service.
Installation and Operating Instructions SINAMICS G180
Operating Instructions, 02/2019, 4BS0751-007