Operation
8.3 NAMUR mode settings
8.3.7
Operation according to "NAMUR 6"
(D)
(S)
Figure 8-12
Operation different from "NAMUR 5"
The operation "Speed On" for "normal" mode is dynamic.
● Start the drive with a normally open contact at -X2:10.
● Issue the command "Speed Off" with an NC contact at -X2:11.
144
Dynamic: Pushbutton mode
Static: Switch mode
Assignment of the control cable terminals for "NAMUR 6" mode
Installation and Operating Instructions SINAMICS G180
Operating Instructions, 02/2019, 4BS0751-007