Siemens SINAMICS G180 Installation And Operating Instructions Manual page 178

Operation
8.8 Examples / Applications
①
"Global" = functional for "Test" and "Normal"
②
If you use these inputs, remove the jumper.
③
As long as "P-INTERFACE: Reset-Source" is set to "Global" , all reset sources are always effective.
④
Max. current load of the control voltages:
+ 24 V DC, potential 2: 300 mA
•
+ 15 V DC, potential 2: 150 mA ± 10 mA
•
This voltage can also supply a speed encoder connected at terminal -X101.
Figure 8-36 Control cable terminals for "NAMUR" application
176
Installation and Operating Instructions SINAMICS G180
Operating Instructions, 02/2019, 4BS0751-007