Description
3.3 Accessories
Component
L/A/S
"Link / Activity /
Speed" display
(port 1 + port 2)
3.3.14.3
Modbus RTU
You can purchase a Modbus board as an accessory. The Modbus board is installed under
the plastic cover. The board can be retrofitted. You recognize from the description "...
code
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
Figure 3-8
60
Function
Off
Green, lit
Green, flickering
Yellow, lit
Yellow, flickering
_ _ _ _ M _" on the rating plate that a Modbus board has been integrated.
Modbus connection
Switch for terminating resistor
DIL switches 1 - 7: Modbus address, configurable
DIL switches 8, 1, 2: baud rate, configurable
DIL switches 3, 4: parity, configurable
DIL switch 5: interface type, configurable
LED "Status Hardware Settings"
LED "Bus ready"
LED "Processing"
LED "Bus error"
Modbus board
No connection
No communication
Connection with
Ethernet connection established, but
100 Mbit
no communication.
Activity with
Ethernet connection established and
100 Mbit
active communication.
Connection with
Ethernet connection established, but
10 Mbit
no communication.
Activity with
Ethernet connection established and
10 Mbit
active communication.
Installation and Operating Instructions SINAMICS G180
Operating Instructions, 02/2019, 4BS0751-007
Type