Obtaining On-Line Help - GE DigitalFlow GF868 Programming Manual

Chapter 1. Programming Site Data

1.3 Obtaining On-line Help

A context-sensitive, on-line help system is programmed into every Model GF868 flowmeter. On-line help, which
displays additional information related to the current task, may be accessed at any time by pressing the
the keypad. The help information will be shown on the currently selected pane of the display screen, as shown in
Figure 2.
After entering the on-line help system, the following functions are available on the option bar of the selected display
pane:
•
Press (or
MORE: [F1]
•
Press (or
EXIT: [F2] [F6]
•
Press (or
ERROR: [F3]
- (or -
[F1] [F4] [F5] [F8]
the desired error code or to exit the help system.
Note: See the Service Manual for a complete listing of all error codes and messages
•
FLOW: Press [F4] (or
the - (or -
[F1] [F4] [F5]
on the desired measurement parameter or to exit the help system.
6
ON-LINE HELP
MORE
Figure 2: Typical On-Line Help Screen
) to access this function, and the next screen of text is displayed in the prompt area.
[F5]
) to access this function, and the Model GF868 returns to measurement mode.
) to access this function, and the various Model GF868 error codes are displayed. Use the
[F7]
) function keys, in conjunction with the [ and [ keys, to obtain additional information on
[F8] ) to access this function, and the various flow measurement parameters are displayed. Use
) function keys, in conjunction with the [ and [ keys, to obtain additional information
[F8]
EXIT ERROR
DigitalFlow™ GF868 Programming Manual (1-Channel)
FLOW
[HELP] key on