Sample Manager Ftn-R Specifications - Waters ACQUITY Arc System System Manual

C.3 Sample Manager FTN-R specifications
Table C–3: SM FTN-R specifications
Attribute
Injection volume
range
Accuracy (aspiration)
Linearity
Precision
Sample capacity
Sample compartment
temperature
Temperature accuracy +/- 0.5 °C at the sensor
Temperature stability
Injection needle wash Integral, active, and programmable
Minimum sample
required
Sample carryover
Advanced capabilities
Primary wetted
materials
Specification
0.1 to 50.0 µL, standard
Up to 1000.0 µL, with optional extension loops
+/- 0.2 µL
>0.999; 0.2 – 50.0 µL
< 1.0% RSD 0.5 – 0.9 µL
<0.5% RSD 1.0 – 4.9 µL
<0.25% RSD 5.0 – 1000.0 µL
768 (2× 384-well plate); or 96 (2-mL vial holders)
Any two of the following:
• 48 position, 2.00-mL vial holder (total capacity of 96
vials)
• 96-well plate
• 384-well plate
• 48 position, 0.65-mL micro-centrifuge tube plate
• 24 position, 1.50-mL micro-centrifuge plate
4.0 –40.0 °C, settable in 0.1 °C increments (optional)
+/- 1.0 °C at the sensor
3 µL residual, using Waters Maximum Recovery 2-mL vials
<0.002% (caffeine) under UV conditions
Auto-dilution; auto-addition; load ahead
316L stainless steel, gold plated stainless steel, polyimide,
PEEK blend, DLC
June 12, 2015, 715004747 Rev. A
Page 82