Power Cord Replacement Hazard; Hand Crush Hazard; Bottle Placement Prohibition; Fcc Radiation Emissions Notice - Waters ACQUITY Arc System System Manual

Power cord replacement hazard

Warning:
United States and HAR-type (or better) cord in Europe. The main power cord
must be replaced only with one of adequate rating. For information
regarding what cord to use in other countries, contact your local Waters
distributor.

Hand crush hazard

Warning:
parts in the source, keep hands clear of the regions marked with yellow and
gray labels.
High voltage hazard
Warning:
• Do not remove the mass spectrometer's protective panels. The
components they cover are not user-serviceable.
• When the instrument is in Operate mode, avoid touching the areas
marked with the high voltage warning symbol. To touch external areas
marked with the symbol, first put the instrument in Standby mode.

Bottle placement prohibition

Prohibited:
equipment, do not place vessels containing liquid atop the workstation or ancillary
equipment or otherwise expose those units to dripping or splashing liquids.
Prohibited:
—atop the workstation or ancillary equipment or otherwise expose those
units to dripping or splashing liquids.

FCC radiation emissions notice

Changes or modifications not expressly approved by the party responsible for
compliance, could void the users authority to operate the equipment. This device
complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
To avoid electric shock, use the SVT-type power cord in the
To avoid hazards associated with the reciprocating or rotating
To avoid electric shock, observe these precautions:
To avoid injury from electrical shock or fire, and damage to the
Do not place vessels containing liquid—such as solvent bottles
June 12, 2015, 715004747 Rev. A
Page iv