Administrator Password Configuration - Avaya Vantage K175 Installing And Administering

Device configuration
No. Task
5. Configure a user group.
6. Configure HTTP proxy server settings.
7. Configure SIP server settings.
8. Configure a DHCP site-specific option
number.
9. Configure access to third party
applications.

Administrator password configuration

You must set up an administrator password to enable administrator settings on Avaya Vantage
™
Avaya Vantage uses the ADMIN_PASSWORD or PROCPSWD parameters to store the
password and provide access to administrator options in the Settings menu.
• If ADMIN_PASSWORD is configured, Avaya Vantage
and ignores the PROCPSWD value.
September 2018
Notes
then the configured DNS information is
applicable for both interfaces.
See Setting the DNS name and address
page 68.
You must specify a user group number to
provide configuration parameters according to
the assigned user group.
See Setting a user group for a specific
configuration
You must provide an address of a server that
acts as a gateway between your organization's
local network and other networks. If required,
specify addresses that can bypass the proxy
server.
See Setting up an HTTP proxy and
exception
You must have a SIP server to make and
handle calls. Additional SIP servers can be
configured to provide system survivability. If
the 46xxsettings.txt file cannot be
downloaded, you can configure SIP settings
through the Settings menu of the device
See Configuring SIP server settings
page 71.
You must specify a DHCP site-specific option
number to provide configuration parameters
according to the assigned site-specific option.
See Setting up a DHCP site-specific option
number on page 72.
Specify which applications an user can install.
See Access to Google Play applications for
K165 and K175
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
on page 70.
on page 70.
on page 77.
™
uses the ADMIN_PASSWORD value
™
on
on
™
.
66