Server Addresses And Ports - Avaya Vantage K175 Installing And Administering

Supported configuration parameters
Parameter
ADMINTIMEFORM
AT

Server addresses and ports

Parameter
DES_STAT
September 2018
Type Default Is set to
value default
on reset
Integer 0 No
Type Default Is set to
value default
on reset
Numeric 2
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Description
• The SET command in the 46xxsettings.txt
file.
With IP Office, set this parameter in the
46xxspecials.txt file.
Specifies whether Avaya Vantage
hour or 24-hour time format. The options are:
• 0: Use the 12-hour time format.
• 1: Use the 24-hour time format.
™
Avaya Vantage uses the selected time format in all
areas that displays time, including the top bar, call
log, and calendar.
For provisioning, use the SET command in the
46xxsettings.txt file.
This parameter is supported in all modes.
Description
Specifies whether to attempt Device Enrollment
Services discovery if there is no configuration file
server provisioned on the device. Discovery is
attempted when the device is starting.
You can assign one of the following values:
• 0: Device Enrollment Services discovery is
disabled and can only be enabled by resetting the
device to its default settings.
• 1: Device Enrollment Services discovery is
disabled and can be enabled by changing the
value of DES_STAT to 2.
• 2: Device Enrollment Services discovery is
enabled.
When DES_STAT is set to 2 and
FILE_SERVER_URL is not retrieved from DHCP or
LLDP, the device attempts to communicate with
Device Enrollment Services during startup to obtain
™
™
uses the 12-
Table continues...
116