Avaya Vantage K175 Installing And Administering page 117

Parameter
DNSSRVR
DOMAIN
September 2018
Type Default Is set to
value default
on reset
String 0.0.0.0 Yes
String Null Yes
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Description
the provisioning or file server address. In addition, if
the file server is configured through Settings,
Device Enrollment Services discovery will not be
triggered.
For provisioning, use:
• DHCP option 242. The precedence is 3.
• The SET command in the 46xxsettings.txt
file. The precedence is 5.
Specifies up to three IP addresses of DNS servers
in the dotted decimal format.
The value of the parameter is a list of IP addresses
separated by commas without any spaces between
™
entries. Avaya Vantage
DNS servers in the order specified in the parameter.
Both the Wi-Fi and Ethernet interfaces use the
configured DNS server and domain information. An
option to configure DNS information specifically for
each Wi-Fi network is unavailable. Therefore, if a
user toggles between the Wi-Fi and Ethernet
interfaces, then the configured DNS information is
applicable for both interfaces.
This parameter is supported in all modes.
For provisioning, use:
• The Option 6 value in a DHCPACK message.
• The SET command in the 46xxsettings.txt
file.
• The Settings menu on the device.
Specifies a domain name.
™
Avaya Vantage uses domain names when DNS
names in configuration parameter values are
resolved to IP addresses. If DOMAIN is null, all
DNS names must be fully qualified. If servers in a
network are in more than one sub-domain, server
DNS names must include the sub-domain name
and DOMAIN must be set to the lowest level
common domain.
This parameter is supported in all modes.
™
Server addresses and ports
tries to connect to the
Table continues...
117