Dhcp Server Configuration - Avaya Vantage K175 Installing And Administering

No. Task
3. Ensure that a file server is installed and
configured.
For more information about setting up the DHCP and file servers in the IP Office environment, see
™
Avaya IP Office

DHCP server configuration

Configure the DHCP server to:
• Dynamically assign IP addresses to Avaya Vantage
• Provision device and site-specific configuration parameters through various DHCP options.
In a Device Enrollment Services environment, the DHCP server is mainly used to assign IP
addresses to the devices. The device receives the file server address from Device Enrollment
Services.
Setting up a DHCP server
About this task
Use this procedure to set up a third-party DHCP server. Avaya Vantage
server software as long as the software is correctly configured.
In the IP Office environment, you can use either the IP Office system as the DHCP server or a
third-party DHCP server. For more information, see Avaya IP Office
Installation Notes.
Before you begin
Contact your server software vendor to obtain server software installation and configuration
instructions.
Procedure
1. Install the DHCP server software according to the server software vendor's instructions.
2. Create a DHCP scope to define the range of IP addresses to use.
You can define different scopes from different types of devices.
September 2018
Platform SIP Telephone Installation Notes for Release 11.0.
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Notes
Contact your file server vendor to receive
installation documentation. For configuration
information, see File server configuration
page 40.
In the IP Office environment, Avaya Vantage
requires an external HTTP or HTTPS file
server.
™
devices.
™
DHCP server configuration
on
™
™
supports any DHCP
Platform SIP Telephone
™
39