Avaya Vantage K175 Installing And Administering page 124

Supported configuration parameters
Parameter
LOGSRVR
USER_AUTH_FILE
_SERVER_URL
September 2018
Type Default Is set to
value default
on reset
3.avaya.
pool.ntp.
org
String Null Yes
String Null Yes
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Description
entries. The parameter value can contain up to 255
characters.
This parameter is supported in all modes.
For provisioning, use:
• DHCP option 42.
• The SET command in the 46xxsettings.txt
file.
Specifies an address of a server where syslog
messages are stored.
LOGSRVR can store one IP address of the syslog
server in the dotted decimal or DNS format. The
parameter value can have up to 255 characters.
This parameter is supported in all modes.
For provisioning, use:
• DHCP option 7 in a DHCPACK message.
• The Settings menu on the device.
Specifies a list of user authenticated file server
URLs.
• If this parameter is configured, Avaya Vantage
displays the Unified Login screen. In the current
release, Avaya Vantage
Device Services user authentication servers only.
If you did not provide the user's SIP extension
and password in Avaya Aura
™
Avaya Vantage will also prompt the user to enter
the SIP extension and password.
• If this parameter is not configured, Avaya
™
Vantage displays the SIP Login screen. In this
case, the user only needs to enter the SIP
extension and password to log in to Avaya
™
Vantage .
The value of the parameter is a list of file server
addresses separated by commas without any
spaces between entries. A file server URL must use
one of the following formats:
• http://hostname[:port]
• https://hostname[:port]
™
™
™ ®
supports Avaya Aura
®
Device Services,
Table continues...
124