Avaya Vantage K175 Installing And Administering page 127

Parameter
DHCP_SSON
DHCPSTD
ICMPDU
September 2018
Type Default Is set to
value default
on reset
Numeric 242 Yes
Integer 0 Yes
Integer 1 Yes
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Description
This parameter is supported in all modes.
For provisioning, use the Settings > Network >
Ethernet > IP interface > Use DHCP menu on the
device.
Specifies the site-specific option number for DHCP.
The range is from 128 to 254.
This parameter is supported in all modes.
For provisioning, use the Settings > Wireless &
networks > More > DHCP Site Specific Option
Number (SSON) menu on the device.
Specifies the DHCP lease violation flag. Assign one
of the following values:
• 1: To comply with the DHCP standard. When the
DHCP lease expires, Avaya Vantage
immediately releases an IP address.
• 0: To enter the proprietary state. When the DHCP
lease expires, Avaya Vantage
the IP address.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies whether Avaya Vantage
Internet Control Message Protocol (ICMP)
Destination Unreachable (DU) messages to inform
the source host that a port is unreachable. Assign
one of the following values:
• 0: DU messages are not transmitted.
• 1: DU messages are only transmitted for a UDP
port that ranges from 33,434 to 33,523.
• 2: DU messages are transmitted.
This parameter is supported in all modes.
For provisioning, use:
• A name=value pair in a DHCPACK message.
• The SET command in the 46xxsettings.txt
file.
™
Network settings
™
™
continues to use
™
generates
Table continues...
127