Avaya Vantage K175 Installing And Administering page 151

Parameter
LOCAL_LOGS_EN
ABLED
LOCAL_LOG_LEV
EL
LOG_CATEGORY
September 2018
Type Default Is set to
value default
on reset
Integer 1 Yes
Integer 4 Yes
String ALL Yes
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Other operational parameters and settings
Description
• The Settings menu on the device.
Specifies whether Avaya Vantage
messages. Assign one of the following values:
• 0: Local log storage is disabled.
• 1: Local log is storage is enabled.
This parameter is supported in all modes.
For provisioning, use:
• The SET command in the 46xxsettings.txt
file.
• The Settings menu on the device.
Specifies the severity level for local log messages.
™
Avaya Vantage stores a log message if a severity
level of an event is equal or less than the value
specified in this parameter. Assign one of the
following values:
• 3: Error
• 4: Warning
• 5: Notice
• 6: Informational
• 7: Debug
This parameter is supported in all modes.
For provisioning, use:
• The SET command in the 46xxsettings.txt
file.
• The Settings menu on the device.
Specifies a list of logging categories.
The parameter value is a list of comma-separated
keywords representing logging categories.
Logging implementation blocks all traces at the
Warning or lower severity levels unless the category
corresponding to a given trace is enabled. The
device filters all ANDROID and KERNEL syslog or
log categories in the following cases:
• You do not configure this parameter for these
categories.
™
™
stores log
Table continues...
151