Avaya Vantage K175 Installing And Administering page 119

Parameter
HTTPPROXY
HTTPEXCEPTION
DOMAINS
September 2018
Type Default Is set to
value default
on reset
String Null Yes
String Null Yes
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Description
• The siaddr field value in the DHCPACK message.
The precedence is 2. Only the dotted decimal
format is supported. Avaya Vantage
addresses received using this method as HTTP
server addresses.
• The SET command in the 46xxsettings.txt
file. The precedence is 3.
• The Settings menu on the device. The
precedence is 5.
Specifies an address of an HTTP proxy server. A
proxy server address uses the hostname[:port]
format, where:
• hostname is either an IP address in the dotted
decimal format or a domain name.
• port is an optional port number.
This parameter is not a URL and it must not begin
with http://.
The range is the default string length.
This parameter is supported in all modes.
For provisioning, use:
• The SET command in the 46xxsettings.txt
file.
• The Settings menu on the device.
Specifies domains that are excluded for use of the
HTTP proxy server.
The value of the parameter is a list of domains
separated by commas without any spaces between
entries. The range is the default string length.
A HTTP connection for SCEP is set up through
HTTPPROXY only if the rightmost part of the
domain specified in MYCERTURL does not match
any domain specified in this parameter.
This parameter is supported in all modes.
For provisioning, use:
• The SET command in the 46xxsettings.txt
file.
• The Settings menu on the device.
™
Server addresses and ports
™
considers
Table continues...
119