Avaya Vantage K175 Installing And Administering page 167

Parameter
APPLY_DIALINGR
ULES_TO_PLUS_
NUMBERS
AUTOAPPLY_ARS
_TO_SHORTNUM
BERS
PHNREMOVEARE
ACODE
DIALPLANLOCAL
CALLPREFIX
September 2018
Type Default value Is set to
Numeric 0
Numeric 1
String 0
String 0
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Avaya Breeze
Description
default on
reset
The value can be of 0 to 2 characters in
length. The allowed characters are 0-9, *,
and #.
Yes Specifies whether to apply dialing rules on
phone numbers with the plus sign (+) at the
beginning.
Assign one of the following values:
• 0: To ignore the dialing rules for phone
numbers that begin with the plus sign (+).
• 1: To replace the plus sign (+) with dial
plan digits.
Whenever possible, configure the plus (+)
dialing option in Session Manager instead
of enabling this parameter.
Yes Specifies whether to disable the dialing
rules logic that automatically appends the
outside line access code (PHNOL) to
numbers that are shorter than the shortest
extension length.
Assign one of the following values:
• 0: To disable the logic. The PHNOL code
is not appended to numbers that are
shorter than the shortest extension
length.
• 1: To enable the logic. The PHNOL code
is appended to numbers that are shorter
than the shortest extension length.
Yes Specifies whether the area code must be
removed for local calls.
This parameter is obsolete. While it is still
supported for backward compatibility,
Avaya recommends that you use the newer
parameter,
DIALPLANLOCALCALLPREFIX.
Yes Indicates whether the area code must be
removed for local calls. Assign one of the
following values:
• 0: To disable the removal of the area
code for local calls.
™
CSDK parameters
Table continues...
™
167