Rear View - Fujitsu PRIMERGY RX800 S2 Operating Manual

Preparation for Operation
12 Power-on LED
4.1.2

Rear View

Ports and Connectors
1
14
15
Figure 15: Rear view of server (ports and connectors)
1 System Power Connector for
1st power supply unit (PS1)
2 System Power Connector for
2nd power supply unit (PS2)
3 Service Processor Ethernet
10/100 connector
U41621-J-Z156-1-76
– When this LED is lit and not flashing, it
indicates that the server is turned on.
– When this LED is flashing, it indicates
that the server is turned off and still
connected to an AC power source.
– When this LED is off, it indicates that
AC power is not present, or the power
supply or the LED itself has failed.
4
2
3
13 12 11 10
The system power cords are connected to
these two connectors to provide power to
the device.
Use this connector to connect the service
processor to a network.
Controls and Indicators
6 7
5
9 8
47