Fujitsu PRIMERGY RX800 S2 Operating Manual page 17

Hide thumbs Also See for PRIMERGY RX800 S2:
Table of Contents

Advertisement

Introduction
Processors
Memory
Drives
Hot-Plug PCI-X
Adapter Slots
Video
Table 1: System features
U41621-J-Z156-1-76
Up to 4 processors (depending on configuration):
®
– Intel
Xeon™ MP dual-core
– MP 7020: 2x1 MB Level-2 cache, ECC, 2.67 GHz
– MP 7040: 2x2 MB Level-2 cache, ECC, 3.0 GHz
– 667 MHz Front Side Bus
– XA-64e™ chip set with integrated memory, I/O,
256 MB Level-4 cache, and remote I/O controllers
– Minimum: 2 GB or 4 GB in basic configuration
(depending on memory type)
– Maximum: 32 GB or 64 GB (depending on
memory type)
– Type: ECC DDR II SDRAM, registered DIMMs
only, Memory Scrubbing, Chipkill™, Redundant Bit
Steering, Memory Mirroring
– Supports 1 GB and 2 GB, 4 GB dual inline
memory modules (DIMMs) which must be fitted in
pairs
– Supports up to six SAS hard disk drives
– CD/DVD-ROM drive: IDE
Six 64-bit Hot-plug PCI-X 2.0 266 Mhz Adapter Slots
ATI Radeon 7000
– PCI bus interface
– Compatible with SVGA
– 16 MB DDR SDRAM video memory
Features
11

Advertisement

Table of Contents
loading

Table of Contents