Fujitsu PRIMERGY RX800 S2 Operating Manual page 28

Notes on Safety
Modules with Electrostatic-Sensitive Devices:
Electrostatic-sensitive components may be identified by the following sticker:
Figure 1: ESD label
When you handle components fitted with ESDs, you must observe the following
points under all circumstances:
Remove the power plugs from the power sockets before inserting or
removing components containing ESDs.
You must always discharge static build up (e.g. by touching a grounded
object) before working.
Use a grounding cable designed for this purpose to connect yourself to the
system unit as you install components.
The equipment and tools you use must be free of static charge.
Always hold components with ESDs at the edges or at the positions
highlighted in green (touch points).
Do not touch any exposed pins or conductors on a component.
Place all components on a static-safe base.
I
You will find a detailed description for handling ESD components in the
relevant European or international standards (EN 61340-5-1,
ANSI/ESD S20.20).
22
Important Notes
U41621-J-Z156-1-76