Cleaning The Server - Fujitsu PRIMERGY RX800 S2 Operating Manual

4.4

Cleaning the Server

V
CAUTION!
Switch the server off, and pull the power plugs out of the grounded-
contact power sockets.
Do not clean any interior parts yourself; leave this job to a service
technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic.
Ensure that no liquid enters the system. Ensure that the ventilation areas
of the server and the monitor are free.
Use a cloth for disinfection to clean the keyboard and the mouse.
Wipe the server and monitor casing with a dry cloth. If particularly dirty, use a
cloth that has been moistened in a mild domestic detergent and then carefully
wrung out.
U41621-J-Z156-1-76
Cleaning the Server
87