Table of Contents
Advertisement
Error Controls and Indicators
5.1.3
LED Card
The LED Card is located inside the Operator Information Panel.
Proceed as follows:
Ê Press the release latch on the front of the Operator Information Panel to the
left (see pos. 8 in figure 19).
Ê Slide it forward.
This reveals the LED card. Lit LEDs on this panel indicate the type of error
that has occurred (see figure 20).
Remind Button
Figure 20: LED Card Layout, seen from top
Ê Look at the system service label on the top of the server, which gives an
overview of internal components that correspond to the LEDs on the LED
card.
This information and the information in section "Light Path Diagnostic LEDs"
on page 93 can often provide enough information to correct the error.
92
Troubleshooting and Tips
U41621-J-Z156-1-76
Advertisement
Table of Contents
