Configuring The Server; Bios Setup - Fujitsu PRIMERGY RX800 S2 Operating Manual

Configuring the Server

4.3 Configuring the Server
4.3.1

BIOS Setup

Using the Configuration/Setup Utility program
Configuration/Setup is a menu-driven utility that is part of the basic input/output
system (BIOS) code that comes with your server. You can use it to:
View configuration information
View and change assignments for devices and I/O ports
Set the date and time
Set and change passwords
Set the startup characteristics of the server and the order of startup devices
Set and change settings for advanced hardware features
View and clear error logs
Change interrupt request (IRQ) settings
Enable USB legacy keyboard and mouse support
Resolve configuration conflicts
The following sections provide instructions for starting the Configuration/Setup
Utility program and descriptions of the menu choices that are available.
Starting the Configuration/Setup Utility Program
Complete the following steps to start the Configuration/Setup Utility program:
Ê Turn on the server and watch the monitor screen.
Ê When the message
[F1]. If you have set both a power-on password and an administrator
password, you must type the administrator password to access the full
Configuration/Setup Utility menu. If you do not type the administrator
password, only a limited Configuration/Setup Utility menu is available.
54
Press F1 for Configuration/Setup
Preparation for Operation
appears, press
U41621-J-Z156-1-76