Fujitsu PRIMERGY RX800 S2 Operating Manual page 56

Controls and Indicators
8 I/O board error LED
9 Gigabit Ethernet 2 activity
LED
10 Gigabit Ethernet 2 link LED
11 Gigabit Ethernet 1 activity
LED
12 Gigabit Ethernet 1 link LED
13 SMP Expansion Port 3 link
LED
14 SMP Expansion Port 2 link
LED
15 SMP Expansion Port 1 link
LED
50
Preparation for Operation
When this LED is lit, it indicates that there
is a problem with the I/O board.
When this LED is lit, it indicates that there
is activity between the server and the net-
work.
When this LED is lit, it indicates that there
is an active connection on the Ethernet
port.
When this LED is lit, it indicates that there
is activity between the server and the net-
work.
When this LED is lit, it indicates that there
is an active connection on the Ethernet
port.
When this LED is lit, it indicates that there
is an active connection on SMP Expansion
Port 3.
When this LED is lit, it indicates that there
is an active connection on SMP Expansion
Port 2.
When this LED is lit, it indicates that there
is an active connection on SMP Expansion
Port 1.
U41621-J-Z156-1-76