Table of Contents
Advertisement
Preparation for Operation
If the server is installed in a multi-node configuration, pressing the power
button on the primary node in the partition will start an orderly shutdown of
the operating system and turn off the server.
The server can be turned off from the RSA-II user interface (see the RSA-II
user manual for more details).
If the Wake on LAN feature turned on the server, the Wake on LAN feature
can turn off the server.
You can turn off the server through a request from the service processor.
After you turn off the server, wait at least 5 seconds before you turn on
i
the server again.
U41621-J-Z156-1-76
Switching the Server On and Off
53
Advertisement
Table of Contents
