Fujitsu PRIMERGY RX800 S2 Operating Manual page 14

Features
The systems management capabilities also provide system monitoring, event
recording, and dial-out alert capability.
The RSA-II provides the following functions:
– Around-the-clock remote access and system management of your server
– Remote management independent of the status of the managed server
– Remote control of hardware and operating systems
– Web-based management with standard Web browsers
ServerView enables the management of all PRIMERGY servers in the network
via a central console. Here ServerView supports the following functions:
Temperature monitoring of the CPU and the surrounding area.
Timer-controlled switch-on (Timer)
Remote switch-on (Ring Indicator)
Watchdog timer for Automatic Server Reconfiguration and Restart (ASR&R)
in the event of failure of memory modules or processors.
Pager message when rebooting system following an error
Monitoring of PCI bus loading
Watchdog timer for operating system monitoring and application monitoring
Detailed status and error reports for bus systems, processors and main
memory
Statistics for service technicians (operating hours counter, counter for
switch-on/switch-off cycles)
Error message logging in non-volatile RAM (NVRAM)
Further information on the ServerView server management is provided in the
associated documentation (see "Related Publications" on page 133).
Service and Support
The PRIMERGY RX800 S2 is service-friendly and modular (compute node
housing), thus enabling quick and simple maintenance.
Blue or green on a component indicates "touch points", where you can grip the
component to remove it from or install it in the server, open or close a latch, and
so on. Orange on a component or an orange label on or near a component
indicates that the component can be hot-plugged like power supplies, fans and
hot-plug PCI slots.
8
Introduction
U41621-J-Z156-1-76