H.6
Cancel Demonstration Mode
You can cancel demonstration mode at any time. The modem then returns to normal operation.
You cannot restart a canceled demonstration. You must get a new demonstration code and start
a new demonstration.
H.6.1 Cancel a Demonstration Mode
1.
Go to the Terminal Port Main Menu
2.
Type 19
3.
Press Enter
4.
On the Enter Selection Number line, type 45
5.
Press Enter
6.
Use the numeric keypad to enter 0000 0000 0000
7.
Press Enter
The modem ends the demonstration immediately. The feature set reverts to the permanent
configuration.
H.7
Web Browser Software Upgrade
You can upgrade features through the Web Browser interface.
H.8
Monitor and Control
You can monitor and control all modem settings through the Web Browser interface. User rights
control your level of access.
1.
From the Modem Introduction page, click the MONITOR & CONTROL tab
2.
If prompted, enter your Username and Password
3.
Press Enter
The screen shows enabled features.
Appendix H
DMD1050TS Satellite Modem Board
H–4
Revision 1
MN-DMD1050TS