Test Menu - Comtech EF Data DMD1050TS Installation And Operation Manual

7.7.6 Test Menu

The Test Menu has the following submenus:
•
PATTERN/CARRIER
•
I/Q PLOT
•
SPECTRUM PLOT
7.7.6.1 Test | Pattern / Carrier Page
CAUTION
You can cause undesirable network loops by using the modem's loopback
capabilities with the Ethernet data interface.
To run any type of data test with an Ethernet interface, you must use two modems connected
back-to-back. Do not use one modem and a loopback.
Test | Pattern / Carrier Page
Tx Test Pattern
Rx Test Pattern
Rx Pattern Sync
Web Browser
Figure 7-38. Test | Pattern / Carrier Page Example
NONE
•
2047
•
2^15-1
•
2^23-1
•
NONE
•
2047
•
2^15-1
•
2^23-1
•
YES
•
NO
•
7–69
DMD1050TS Satellite Modem Board
Use to enable the available transmit test patterns.
Use to enable the available receive test pattern.
Read only; yes means that the received test pattern is in
sync.
Revision 1
MN-DMD1050TS