Boot Mode Options (Reference Only - Comtech EF Data DMD1050TS Installation And Operation Manual

D.5.2 Boot Mode Options (Reference only)
Boot Mode selections are based on the network's requirements for setting up the Web browser.
Boot Mode options include:
DEFAULT
During initialization (boot up), the modem restores the web settings to the standard IP Mask and
addresses supplied by the modem. The modem is taken off the network and is not accessible.
The Default settings are listed as follows:
IP Address Mask:
Modem IP Address:
Server IP Address:
Router IP Address:
BOOTp
During initialization (boot up), the modem gets the names, masks and IP Addresses of the
modem, router and server.
NON-VOL - Stores and uses IP Mask and addresses provided by the user.
IP TEST - Stores and uses IP Mask and addresses to fixed settings as listed as follows:
BOOTp Server Tag:
IP Address Mask:
Modem IP Address:
Server IP Address:
Router IP Address:
Appendix D
255.000.000.000
010.000.000.001
010.001.001.001
010.000.001.001
206
255.255.255.000
192.168.0.238
192.168.000.101
192.168.000.102
D–9
DMD1050TS Satellite Modem Board
Revision 1
(FF.00.00.00 hex)
(C0.A8.00.EE hex)
(0A.01.01.01 hex)
(0A.00.01.01 hex)
(FF.FF.FF.00 hex)
(C0.A8.00.EE)
(C0.A8.00.65)
(C0.A8.00.66)
MN-DMD1050TS