Comtech EF Data DMD1050TS Installation And Operation Manual page 198

If a Security Alert shows, click Continue to this website to proceed.
From the login page in the TRANSEC Module HTTPS interface, use the Interface Navigator to
select one of three modes of operation.
Crypto Officer: Connects to the secure TRANSEC Module HTTPS Interface (User Name and
Password required).
Modem Operator: Connects to the Base Modem HTTP Interface. See Chapter 7. Web Browser
for more information.
Network Operator: Not Available.
Once the login page opens, Crypto Officer appears as the default.
On the Login page, type in a valid Crypto Officer User Name and Crypto Officer Password. The
default for both is comtech. Click Log In.
The TRANSEC Module User Name and Password are each restricted to a
minimum of 7 and a maximum of 25 characters, excluding: (ASCII Code 58), <
(ASCII Code 60), > (ASCII Code 62), " (ASCII Code 34), and ~ (ASCII Code 126).
Once the User Name and Password are accepted, the TRANSEC Module Configure page
opens.
TRANSEC Module HTTPS Interface
DMD1050TS Satellite Modem Board
8–2
Revision 1
MN-DMD1050TS