22 • Fieldbus coupler 750-342
Operating system
3.1.3
Operating system
Following is the configuration of the master activation and the electrical in-
stallation of the fieldbus station to start up the system.
After switching on the supply voltage, the coupler determines the I/O modules
and the present configuration.
In the event of a fault, the coupler changes to the "Stop" condition. The "I/O"
LED flashes red. After a fault free start up, the coupler changes to the "Field-
bus start" status and the "I/O" LED lights up green.
Determination of the I/O modules
Fig. 3-6: Operating system 750-342
Switching on the
supply voltage
Initialization,
and the configuration,
"I/O" LED is blinking red
Test o.k.?
Yes
Fieldbus coupler is
in operating mode
"I/O" LED is shining green
No
Stop
red "I/O" LED indicates
blink code
g012920e
Modular I/O System
ETHERNET TCP/IP