Reading Out The Information As Html Pages; Information On The Fieldbus Node (Terminal Status); Information On The Fieldbus Coupler (Coupler And Network Details); Reading Out The Information Via The Http Protocol - WAGO -I/O-SYSTEM 750 User's Installation And Configuration

40 • Fieldbus coupler 750-342
Starting up ETHERNET TCP/IP fieldbus nodes
3.1.6.6

Reading out the information as HTML pages

The information saved in the fieldbus coupler can be read as an HTML page
using a web browser.
•

Information on the fieldbus node (Terminal Status):

-
-
•

Information on the fieldbus coupler (Coupler and Network Details):

-
-
-
-
-
-
-
•
Diagnostic information on the fieldbus coupler (Coupler Status):
-
-
-
Fig. 3-14: Reading out the information via the HTTP protocol
Please proceed as follows:
1. Open a web browser such as Microsoft Internet-Explorer, Netscape Navi-
2. Simply enter the IP address of your fieldbus node in the address field of the
Attention
If the pages are not displayed after local access to the fieldbus node, then de-
fine in your web browser that, as an exception, no proxyserver is to be used for
the IP address of the node.
Number of digital, analog or complex modules
Representation of the process image
Order number
Firmware version
MAC-ID
IP address
Gateway address (if applicable)
Subnet mask
Number of transmitted and received packets
Error code
Error argument
Error description
gator, ...
browser and press the Return key.
The first HTML page with the information on your fieldbus coupler will be
displayed in the browser window. Use the hyperlinks to find out more in-
formation.
G012916d
Modular I/O System
ETHERNET TCP/IP