Technical Data - WAGO -I/O-SYSTEM 750 User's Installation And Configuration

3.2.10

Technical Data

System data
Max. n. of nodes
Transmission medium
Buscoupler connection
Max. length of fieldbus segment 100 m between hub station and 750-342;
Baud rate
Protocols
Programming
IEC 61131-3-3
Approvals
UL
Conformity marking
Technical Data
Max. n. of I/O modules
Input process image
Output process image
Input variables
Output variables
Configuration
Program memory
Data memory
Non-valatile memory
Cycle time
Max. n. of socket connections
Voltage supply
Input current
Efficiency of the power supply
Internal current consumption
Total current for I/O modules
Isolation
Voltage via power jumper con-
tacts
Current via power jumper con-
tacts
Dimensions (mm) W x H x L
Weight
EMC Immunity to interference
EMC Emission of interference
Modular I/O System
ETHERNET TCP/IP
max
max
max
Fieldbus controller 750-842 • 93
limited by ETHERNET specification
Twisted Pair S-UTP 100 Ω cat. 5
RJ45
max. length of network limited by ETHERNET specifi-
cation
10 Mbit/s
MODBUS/TCP, HTTP, BootP
WAGO-I-PRO
IL, LD, FBD, ST, FC
E175199, UL508
Œ
64
max. 512 Byte
max. 512 Byte
max. 512 Byte
max. 512 Byte
via function blocks
128 Kbyte
64 Kbyte
8 KByte
< 3 ms for 1,000 statements/ 256 dig. I/O's
1 HTTP, 3 MODBUS/TCP, 2 PFC, 2 WAGO-I/O-PRO
DC 24 V (-15 % / + 20 %)
500 mA at 24 V
87 %
200 mA at 5 V
1800 mA at 5 V
500 V system/supply
DC 24 V (-15 % / + 20 %)
DC 10 A
51 x 65* x 100 (*from upper edge of DIN 35 rail)
approx. 195 g
acc. to EN 50082-2 (95)
acc. to EN 50081-2 (94)
Technical Data