Scope; Symbols - WAGO -I/O-SYSTEM 750 User's Installation And Configuration

2 • Important comments

Scope

1.2 Scope
This manual describes the field bus independent WAGO-I/O-SYSTEM 750
with the fieldbus coupler for ETHERNET TCP/IP along with the programma-
ble fieldbus controller for ETHERNET TCP/IP.
Item-No.
750-342
750-842
750-4xx...6xx

1.3 Symbols

Danger
Always observe this information to protect persons from injury.
Warning
Always observe this information to prevent damage to the device.
Attention
Marginal conditions must always be observed to ensure smooth operation.
ESD (Electrostatic Discharge)
Warning of damage to the components by electrostatic discharge. Observe the
precautionary measure for handling components at risk.
Note
Routines or advice for efficient use of the device and software optimization.
i
More information
References to additional literature, manuals, data sheets and INTERNET pages.
Components
EtherNet TCP/IP 10 Mbit
Contr. EtherNet TCP/IP TCP 10 Mbit
I/O Modules
Modular I/O System
ETHERNET TCP/IP