Controller Operations
Header
Spinner Assembly Calibration
The spinner assembly must be calibrated if either the
fore/aft or left right cylinders are replaced, or if a new
swath module is installed.
•
Press
to calibrate spinner assembly.
Spinner assembly will move during
WARNING
calibration process. Keep away from
moving parts to avoid injury.
•
Press
to begin calibration process.
•
Spinner assembly will move through range of
motion both fore/aft and left/right. Press
complete.
www.New-Leader.com
(800) 363-1771
when
- 95 -
NL5258G5/NL5300G5
314732-AA-B