Cylinder Bleeding - New Leader AGCO NL5258G5 Operator's Manual

Controller Operations Header

Cylinder Bleeding

Bleeding routine is run to purge air from hydraulic cylinders for accurate positioning. Perform the
bleeding routine at the beginning of each season, after any service work has been performed on the
hydrauilc system, and upon startup if spreader has been sitting for an extended period of time.
• Press to access cylinder bleed routine.
• The Tools main screen will appear. Press
to continue.
Spinner assembly and feedgate(s)
will move during calibration process.
WARNING
Keep away from moving parts to
avoid injury.
• Press to begin bleed routine.
314732-AA-B
- 112 -
NL5258G5/NL5300G5
www.New-Leader.com
(800) 363-1771