General Safety Rules - New Leader AGCO NL5258G5 Operator's Manual

Header

General Safety Rules

Operations
PREPARE FOR EMERGENCIES
Figure 1.2 - Be prepared if a fi re starts. Keep a fully charged fi re
extinguisher and fi rst aid kit in accessible place on the vehicle at all
times.
Fire extinguisher must be Type ABC or Type BC.
Keep emergency numbers for doctors, ambulance service, hospital
and fi re department available at all times.
INSPECT HARDWARE BEFORE USE
Figure 1.3 - Inspect all bolts, screws, fasteners, keys, chain drives,
body mounts and other attachments periodically. Immediately
replace any missing or damaged parts immediately with proper
specifi cation parts.
Inspect spinner fi ns, spinner frame mounting and spinner fi n hardware
daily. Look for missing or loose fasteners, wear and cracks. Replace
immediately if needed. Use only new SAE grade 5 or grade 8 screws
and self-locking nuts.
Tighten all bolts, nuts and screws to specifi ed torques. Refer to
"Standard Torques" in Maintenance section of this manual.
HANDLE FLAMMABLE MATERIALS SAFELY
Figure 1.4 - Handle fuel and hydraulic oil with care. They are highly
fl ammable.
Always stop the engine before refueling machine or fi lling hydraulic
reservoir.
Never smoke while adding fuel or oil to machine. Add fl uids in a safe
place away from open fl ame and sparks.
Do not allow overfl ow. Clean up spilled fuel and oil immediately.
Always have a multipurpose dry chemical fi re extinguisher fi lled and available during machine
operation and when adding fuel. Know how to use it.
www.New-Leader.com
(800) 363-1771
- 9 -
NL5258G5/NL5300G5
Figure 1.2
Figure 1.3
Figure 1.4
314732-AA-B