New Leader AGCO NL5258G5 Operator's Manual page 30

Insert Installation
Header
4. Figure 3 - Support endgate by attaching a hoist to the
lift hooks. Remove hardware from both sides of the
endgate and carefully remove from the spreader.
• NOTE: Always use a sling, spreader bar, or lifting bar
that attaches to the lifting points with a minimum of
60 degrees from horizontal. It is preferable to use
a straight style lifting bar that keeps the attaching
chains in a near vertical orientation.
• NOTE: Always inspect unit lift hooks for signs of wear,
cracking, corrosion, gouges, alterations, or distortion
before use.
314732-AA-B
- 30 -
NL5258G5/NL5300G5
Figure 3
www.New-Leader.com
(800) 363-1771