New Leader AGCO NL5258G5 Operator's Manual page 117

Controller Operations Header
3. Set conveyor dimensions:
• Press "Dimensions" to input conveyor
dimensions. Use keypads to input
conveyor length and sprocket diameter.
Press to return to Chain Oiler
screen.
Press to return to Tools Screen.
4. Set service reminder:
• Press "Service Reminder" to set chain
oiler reminder. Enable Reminder and
use keypad to enter interval hours
desired. To restart reminder after
manually oiling conveyor, press
Press to return to Chain Oiler
Screen.
www.New-Leader.com
(800) 363-1771
.
- 117 -
NL5258G5/NL5300G5
314732-AA-B